Got started on the front panel last week but since the in-laws were arriving from Mexico on Thursday we’ve had to focus on getting the apartment in shape. So it’s been kinda slow on the cab front.
As you can see in the pictures the speaker cover looks aged and yellow but not alarming and to no surprise the backside was black of dust and smoke. Just by removing the speaker cables I ended up black all over. Unmounting of the upper billboard went without any hassle. Just need to be careful with those screw heads not to destroy them or break them.
The original foam strip under the speaker cover had eaten itself into the plastic and the cover was firmly stuck. Enter hobby knife and Qwipes.
Qwipes proved to work fine for removing the residues of the strips but unfortunately it also gladly removes paint so it’s a no no on the billboards or the instruction cover.
The lower billboard was fastened with a foam strip with glue on both sides and was a pain in the ¤£%# to remove. I had to carefully cut through the foam with a hobby knife without scraping the paint. And I still have to figure out how to remove the residues or if just to leave it as it is.
Halfway through the mess. The front panel stripped from all loose parts. Now time for the bath.
Just to show you the before (right) and after (left) a couple rounds of Ajax.
The Qwipes proved to be really useful. Very easy to clean the cables with and using a small barbecue stick it was simple to reach into all those narrow slots and small holes.
Given that the in-laws were arriving I had to make a quick re-assembly after cleaning the control panel. I’m quite happy with the results given the short time frame I had to work with but of course there’s still a lot left to do…